The blast-room, one of the biggest ever built by Hodge Clemco, is part of a £1.5 million investment by the Jack Tighe Group at its Scunthorpe premises and enables it to considerably increase the size and weight of structures and components that can be processed there. The room measures 30m long x 8m wide x 8m high and can accept loads up to 40 tonnes. Double doors at one end provide a 7m x 7m opening.
The walls and roof of the room are constructed from prefabricated mild steel panels that are covered with full-height rubber curtains. The concrete floor of the building is protected with steel plate in order to retain a smooth, safe surface. As well as the main loading doors, two personnel doors have been fitted, all of which are interlocked with the blasting system to prevent it being used if one is open.
Abrasive is recovered by means of a sweep-in hopper, a bucket elevator and a cleaner/separator that delivers clean graded material to a 10-tonne-capacity hopper designed to feed up to four blast machines and allow approximately ten hours of blasting. The cleaner/separator removes fines, dust and over-size contaminants, which are then delivered automatically to bins for disposal. The equipment can be adjusted to ensure only suitable abrasive is re-used.
t: 0114 254 8811
