ABB has launched its new film series: Unstoppable. This series aims to promote diversity and profile three remarkable female leaders in the mining, pulp and paper, and metals industries.
Carl Knight – managing director of process steam and heat transfer specialist Fulton – looks at the advantages of electric steam boilers versus their traditional fuel-fired counterparts.
The Government’s new Energy Bill Relief Scheme, which came into effect on the 1st of October - is encouraging compressed air users to act now to minimise their compressed air energy consumption for the long-term through a series of low-cost measures. PWE reports.
Airborne & structure-borne ultrasound has become a major player in bearing condition monitoring. Once considered just a leak detector, more maintenance & reliability professionals are beginning to realise all of the benefits associated with using ultrasound for condition monitoring applications. The P-F Curve with which we have all become familiar with reflects that trend.
As energy prices continue to soar across Europe, operators may be tempted to delay the recommended maintenance intervals and routine service on compressed air systems in order to save cost. However, this can be an expensive mistake says Gary Spence, Service Operations Leader from CompAir
Serena Cooper, QMS International, looks at closing the skills gap in manufacturing and engineering
Gary Wilde, Technical Services Officer at the British Pump Manufacturers Association (BPMA) offers some basic information and guidance on purchasing, maintaining, and designing pump systems for optimum energy efficiency, CO2 reduction and capital expenditure payback time.
Global miner Anglo American has overcome persistent reliability problems at an important iron ore project in Brazil with the help of Sulzer pump specialists. PWE reports.
Johan Jonzon, CMO and Co-Founder of edge analytics platform developer, Crosser, explains how edge analytics provides instantaneous data to prevent unscheduled downtime.
With JKH Drainage moving to a new 6-acre site to give the company the capacity to grow and take on larger projects, PWE looks at a key piece of equipment to cope with the increased volume of raw materials and finished products - a 35t capacity Straddle Carrier from the Irish manufacturer Combilift.
Whether we’re in a residential or an industrial setting, we’ve all encountered situations where we’re forced to put up with noise disturbance from a pump, pipe or fan, but should we have to? Adam Fox, director at vibration control specialist Mason UK, explains why simply following the available guidance should eliminate this all-too-common problem.
Schneider Electric, the leader in the digital transformation of energy management and automation, has announced a multi-year extension to its technological partnership with Warburtons to improve production at six of its manufacturing sites across the UK and mitigate the rising cost of energy and raw materials.
Do you ever wish you had x-ray eyes to see inside a machine to predict exactly when it will fail? The reality is probably a relentless routine of maintenance checklists and service inspections, together with time-consuming preventive procedures. Nevertheless, unexpected lapses in product quality and machine failures are still likely to happen. PWE spoke to David Hannaby, Market Product Manager for SICK UK to find out more.
PWE spoke to Trenton Roncato Juraszek, mechanical project analyst at the global motor and drive manufacturer WEG to discuss the importance of digitalisation in industry, and how it can help you to remain competitive in an evolving technological landscape
Delta, a leading provider of power and thermal management solutions, has announced it has been honoured for the second consecutive year as one of the Top 100 Global Innovators (2023) by Clarivate for its superior innovation and patent intellectual property portfolio.
Atlas Copco, founded in Stockholm in 1873, has celebrated its 150-year anniversary. During a century and a half, Atlas Copco says it has been driving development and delivering breakthrough innovations to customers in many different industries.
DuPont Personal Protection has announced the winners of its Protection Innovation Award (formerly Kevlar Innovation Award) for the European region.
Parker Hannifin’s Sales Company UK and Ireland has announced that it has become a member of the North West Hydrogen Alliance (NWHA), the largest industry-funded regional hydrogen alliance in the UK.
CKF Systems, a leading UK automation systems integrator, has been part of the Alcumus SafeContractor scheme since its inception in May 2009 and says this demonstrates its unwavering commitment to health and safety.
Multidisciplinary engineering firm adi Group has announced it has embarked upon a huge recruitment drive amid the widening STEM skills gap, on a mission to diversify its workforce as well as employ talented individuals who uphold its responsible business values.
Students at 12 Cumbrian schools are to benefit from new digital manufacturing equipment and specialist teacher training thanks to a collaboration between 3D printing experts and industry.
FANUC UK has announced it is is once again inviting the next generation of robotics engineers to enter the WorldSkills UK Industrial Robotics competition.
Manufacturers face the ongoing challenge of delivering goods in greater volumes and speeds while keeping prices competitive in an overcrowded market. Automation that features software integrated solutions are helping manufacturers meet these challenges by providing precision and versatility through intelligent systems that increase order fulfilment and improve quality control. Steffen Thierfelder, managing director, Northern Europe of Dematic UK and Ireland, explains more.
Offshore Electronics has announced it will provide design for manufacture support and PCB assembly services to Fireco, a supplier and manufacturer of fire door compliance devices and solutions. The move consolidates much of Fireco’s PCBA procurement, with the company having used several suppliers prior to signing its new contract with the Guernsey-based CEM.
ABB has announced it has enhanced its industry-leading RobotStudio robot programming and simulation software with cloud-enabled functionality.
ABB has acquired a minority stake in Swedish start-up Viking Analytics via its venture capital unit, ABB Technology Ventures (ATV). The strategic partnership to develop the next generation of predictive asset health analytics for electrical equipment, will allow customers to predict anomalies before they become a risk to their operations. Financial details of the investment were not disclosed.
In February next year at the Farnborough International Exhibition and Conference Centre, Southern Manufacturing & Electronics 2023 will host nearly 600 firms exhibiting a vast array of components, equipment, software and services
Prashanth Mysore, Strategic Business Development and Industry Marketing Director at DELMIA, part of the Dassault Systèmes Group, looks at what is Digital Twin technology and why is it important for manufacturers?
The future of safety engineering and manufacturing and processing now focuses around the digital and this creates new opportunities and challenges for plants operators, and enables them to enhance efficiency, increase flexibility, while making their plants more safe and secure. Andy Pye, Talking Industry Chair looks at some of the discussion points.
While an increasing number of enterprise companies and some SMEs are adopting digitally transformative technology, the UK continues to fall behind other nations, including the US and Germany. Andy Pye chaired an international panel to explore the trends
Talking Industry’s latest panel discussion looked at the future of Plant & Asset Management. Andy Pye highlights the discussion
The manufacturing and engineering sectors made a strong display of its innovation and confidence at the recent co-located events; Drives & Control, Smart Industry Expo, Plant and Asset Management, Fluid Power & Systems, and Air-Tech Exhibitions – held at Birmingham’s NEC from 5 to 7 April. PWE reports.
On 15 February, Talking Industry covered a range of topics around the general umbrella of IIOT, Communications & 5G. Talking Industry’s Andy Pye reports.
Talking Industry’s Andy Pye reports on another successful Talking Industry discussion on robotics and automation in the UK. Are we seeing the first signs that the lag in investment is finally beginning to turn?
The biennial co-located events: Plant & Asset Management, Drives & Controls, Smart Industry Expo, Fluid Power & Systems, Plant & Asset Management, and Air-Tech Exhibitions – are once again set to return to Birmingham’s NEC between the 5-7 April 2022, alongside MACH. PWE takes a closer look.
Last year marked the 50th anniversary of the iconic 1971 film Willy Wonka & the Chocolate Factory, but was also the setting for a classic Hollywood computer cameo from Siemens involving an overconfident engineer who fails to demonstrate “the greatest miracle of the machine age” by using a supercomputer to reveal the locations of the final golden tickets. PWE reports
Southern Manufacturing & Electronics makes its return to Farnborough from 8 -10 February. PWE looks at the forthcoming event.
Advanced Engineering returns for its 12th year, reuniting the supply chain to learn, network, discover and innovate, forging the future across multiple sectors. PWE reports.
The seventh Talking Industry discussion attempted to explore what could be done to further evangelise the benefits of digitally transformative concepts to improve efficiency and competitive perspective and to define more clearly concepts such as IIoT, Industry 4.0 Smart Factory, Digital Twins, Machine Learning, Analytics and AI. Andy Pye provides this summary review.
Fourth generation power transmissionPowerGrip GT4 ™ is Gates' synchronous elastomer belt reported to have the highest power transmission capacity on the market in its class. But this is not the only feature of this new belt from Gates, a world leader in the supply of specific hydraulic and power transmission solutions. Using new advanced materials, Gates has designed a belt with higher chemical resistance and resistance to a wider temperature range. The new GT4 ™ belt offers improved performance for a wide range of industrial applications.
The theme of the third in the series of Talking Industry online panel discussions organised by DFA Media, the publisher of PWE, was Industrial Networks, IIoT and Communications. The session chairman Andy Pye reports on the event
