Plant & Works Engineering
Home
Menu
Record export order

BUNTING MAGNETICS EUROPE, a leading supplier of magnetic separators and metal detectors, reports it has secured its largest single export order from a German processing plant designer and builder - the record order is to manufacture and supply 63, high-strength, Rare Earth Plate Magnets, which will be installed in a tobacco manufacturing operation in Indonesia.

System delivers benefits

When the directors of panel builders Pneumatechnique were looking at ways to improve efficiency and offer better production consistency they turned to RITTAL and its automation systems for switchgear construction. One of the main issues the company faced was the underemployment of the highly skilled labour force. This had become obvious during an evaluation of work practices that considered how customer demand was being met, and how the company in turn made demands on production as an “internal customer”.

Higher productivity

SANDVIK has announced it will be launching Sanmac 3G at IMTS in Chicago in September, offering a stainless steel material which can significantly increase machining rates. To demonstrate this, the company will be running a ‘Sound Challenge’ on its Booth W-1228 to see if visitors can identify, ‘The sound of higher productivity.’

Faster glass tempering

HERAEUS NOBLELIGHT says recent extensive tests in its Applications Centre have demonstrated that the tempering of glass, heat-formed packaging products used in the medical and pharmaceutical sectors is five times faster and significantly more energy efficient with the new MAX oven than tempering carried out using conventional electric heating techniques.

Built to last

MICHELL INSTRUMENTS says its new HygroSmart HS3 probe has been designed to withstand the kind of harsh and demanding conditions found in industrial processes. The company says unlike many ‘disposable’ probes that have a short life within harsh conditions before needing to be replaced, the HygroSmart HS3 sensor uses Michell’s polymer tile to give long-term reliable measurements

CCC approval gained

CARLO GAVAZZI says due to a continuous increase in sales beyond Europe with the popular RSBT 45mm series of soft starts and to ensure it supports its customers who export into the Asian market place it has now obtained CCC approval. The company says the benefit of this approval allows customers to freely engage with the huge potential of the Chinese market ensuring any imports into China are problem free in customs.

Traceable humidity calibrations

MICHELL INSTRUMENTS says the HygroCal100 is a lightweight, portable humidity verifier, which uses its reliable internal polymer reference to provide automatic verifications of the accuracy of RH probes. However the HygroCal100 interface enables users to assign any hygrometer with an analogue output as a reference device – such as a chilled mirror hygrometer.

Engineering is a great choice for girls

Gugu Moyo is a quality and planning engineer at British UV water disinfection specialist Hanovia. As National Women in Engineering Day is on June 23, she reflects on the challenges and opportunities of a profession where only 6% of professional engineers are women.

Multi-function metering controller

WANNER INTERNATIONAL says its exclusive new "Control Freak" electronic controller provides motor speed control for Hydra-Cell Metering Solutions pumps (or Hydra-Cell bare shaft pumps in metering applications) and is able to control multiple pumps with Variable Frequency Drives (VFDs) from a single point and because motor speed is directly proportionate to flow rate in a Hydra-Cell pump, high accuracy can be achieved through the use of VFDs.

Busbar system

A market-leading power distribution system for enclosures has just extended its range. RITTAL says its popular 185mm Ri4Power busbar provides trusted, safe and compact power distribution within enclosures.

Best in class

QUANTITECH has announced that the Gasmet CEMS II e continuous emissions monitoring system has successfully completed EN 15267-3 testing using FTIR technology for the analysis of low range HF, low range NO, CH4 and Formaldehyde. “This means that it meets the performance specifications for a larger number of components than any other FTIR in this market,” commented Quantitech MD Ken Roberts.

Highest distinction awarded

Professor Olle Wijk, former head of research and development at SANDVIK, has been awarded the Jernkontoret’s grand gold medal in recognition of his life’s work devoted to the development of steel and the Swedish steel research network. “I was extremely touched by receiving this award and feel proud and humble at the prospect of this distinction – it means a lot to me,” said Professor Olle Wijk.

Wear resistant steel

OVAKO says a unique wear resistance testing rig will be featured on its stand at Euro Mine Expo 2016, to show visitors the company’s dedication to research and development in producing engineering steels that meet the exacting demands of the mining industry.

Order products online

MICHELL has announced its new web shop – www.michellonline.com/eu – is now open for business, giving customers in Europe a quick and simple way to order and pay securely for a comprehensive range of relative humidity transmitters.

Turnkey solutions

VALVEFORCE, a leading UK independent steam and control processes expert provides turnkey solutions including specifying and design, supply and installation, service and maintenance. As a control valves specialist Valveforce says it provides outstanding technical knowledge and support to a wide range of business sectors including but not limited to the heating, cooling and ventilation industries. Valveforce also holds an extensive stock of valves for immediate dispatch and sensible delivery times for very large valves.

Rupture disc and safety valve

Rupture discs and holders are commonly used in combination with pressure relief valves (PRVs). Even though rupture discs can be used on their own, the benefits of using both are said to be making this solution a popular choice in the process industries. ELFAB says not only can this combination extend valve life, it can also improve maintenance schedules and support with emission control, while helping to reduce long-terms costs.

High quality finishing

A self-contained HODGE CLEMCO blast-room with high-performance abrasive recovery system and sound insulation has expanded finishing facilities for specialist castings produced by Furniss & White Foundries in South Yorkshire.

Heavy duty gear pumps

The extensive range of Viking Pumps is said to provide one of the widest choices of pumping technologies and designs available today underpinned by Viking’s breadth of fluid handling knowledge and application expertise in solving the most challenging pumping problems. These pumps are available from MICHAEL SMITH ENGINEERS who says it is able to provide Viking pump users with a wealth of practical and technical experience for the complete range of Viking positive displacement pumps.

Pulseless flow dosing

The unique multi-diaphragm arrangement of Hydra-Cell metering and dosing pumps from WANNER is claimed to remove the need for pulsation dampeners in many circumstances. Hydra-Cell pumps from Wanner have multiple, hydraulically balanced diaphragms in a single head, that operate sequentially, dramatically reducing system pulsation and the damage it causes.

Elastomer coated rotary lobe pumps

AXFLOW has announced it has extended its range of positive displacement pumps with the introduction of the LB suite of elastomer coated rotary lobe pumps for flows of between 5m³/hr to 130m³/hr. AxFlow says the LB pump has been designed from scratch following an assessment of products currently on the market with a view to producing a process quality pump, positioned above the more agricultural designs yet without attracting the high costs of high end products.

Infra-red heating system

A fast response medium wave (FRMW) infra-red heating system from HERAEUS NOBLELIGHT is reported to be helping Dura Automotive Systems of Castle Bromwich to ensure the reliable and precise adhesion of molded thermoplastic sealings to custom-designed, automotive glass windows. The system is located in a robotic cell and integrates exactly with the robot cycle.

Possibilities into reality

OVAKO says as the pressure mounts for designers to develop smaller, lighter and stronger components, its clean engineering steels, with their increased fatigue strength, can turn possibilities into reality.

Weld-free tubing

To meet a growing need for coiled tubing in very long lengths, SANDVIK has announced its high-precision tubing unit in Germany has developed a breakthrough method enabling the production of stainless tubing in lengths exceeding 1,000 meters from a single 125 kg hollow – with zero welds.

New products online

PNEUMATICS DIRECT has launched its new 2016-2017 online catalogue, now offering over 50,000 products from a range of industry leading brands. The company says, working extensively with its suppliers has enabled it to give customers the lowest prices in the UK for online sales.

Industrial cellular RTUs

RED LION CONTROLS, an expert in communication, monitoring and control for industrial automation and networking, has announced its Sixnet series RAM 9000 industrial cellular RTUs have received ATEX zone 2, category 3 approval and are safe for use in potentially hazardous environments. This approval follows recent announcements that Red Lion’s rugged RAM industrial cellular RTUs support high-speed 4G LTE worldwide.

High-flow pump

WANNER says its new, seal-less, hydraulically balanced diaphragm pump offers flow rates up to 366 lpm at pressures up to 103 bar.

Oxygen gas monitoring

QUANTITECH reports it has prepared a comprehensive White Paper on the measurement of oxygen gas in furnaces and other industrial processes. Quantitech’s Craig Day says:“Oxygen gas concentration measurements are essential for the effective management of many industrial processes,

Chemical cleaning pump

When a food processing plant in North Yorkshire found that oil coolers were running too hot, and heat exchangers used for pasteurising food were struggling to keep up, the cause was quickly identified as being scale and corrosion debris in the water side of several plate heat exchangers.

Multiple control options

WANNER INTERNATIONAL says its Hydra-Cell Metering and Dosing solutions range includes variants with integrated variable speed drives and says the innovative design combines an AC induction motor with a Variable Frequency Drive (VFD inverter) mounted on the motor.

H&S safety precautions

Bridgewood UK utilises a range of vacuum forming, polyurethane reinforcement and composite moulding processes and says it has been trying to find a safe and simple method to remove unwanted material from both product and employee’s clothing for years, but has consistently experienced issues with compressed air solutions.

Industrial fan selector

AIR CONTROL INDUSTRIES specialises in the design, manufacture and supply of industrial fans, blowers and accessories.

Relative humidity probe

The new HygroSmart HS3 advanced interchangeable relative humidity and temperature probe from MICHELL INSTRUMENTS is said to be 100% configurable to allow maximum flexibility to the user. This gives users the ability to alter their RH and temperature measurements to keep step with changes or developments in their process, with no extra costs.

New digital strategy and website

UK based magnet and magnetic separator equipment manufacturer, BUNTING MAGNETICS EUROPE, reports it has launched a new dynamic and responsive website as part of a fresh digital marketing strategy to reflect several years of growth and changes in the business.

New design possibilities

Cleaner steels by OVAKO are said to be opening up new design opportunities and extending service life for high performance parts. Ovako says today, more than ever, high performance components are expected to withstand higher loads over longer periods of time and the company says its clean steels can facilitate significant opportunities to rethink design solutions for improved safety, time and cost savings in a range of applications.

Tube bending demonstration

SANDVIK says demonstrations of tube bending will be on its stand at Tube 2016 which will be used to show the versatility and how the controlled hardness of Sandvik tube sets a standard of its own for easy bending and leak free connections of the company’s hydraulic and instrumentation tubing.

Validation of humidity probes

MICHELL INSTRUMENTS says its new HygroCal100 humidity verifier provides a practical option for companies that are not able to invest in a full humidity calibration laboratory to verify their humidity probes in-house.

High-temperature pyrometers

FLUKE PROCESS INSTRUMENTS reports it has introduced the Endurance series of high-temperature infrared thermometers. Featuring a stainless steel IP65 housing and galvanically insulated I/Os, these units are said to enable continuous process monitoring of the most demanding industrial applications, including primary and secondary metals manufacturing, carbon processing, and silicon production.

Five webinars, on five topics, in five days

HBM , a specialist in the field of test and measurement, has announced the dates for its latest series of free measurement technology webinars, which take place on 22nd – 26th February 2016.

Nozzles meet chemical challenge

Storing liquids in tanks is essential for many process industry applications, as is the need to agitate the contents to avoid separation and sedimentation. Fluids can be recirculated through tanks to achieve separation, although the process can be enhanced by the introduction of eductor nozzles.

Multifunction tester

Advanced technology electrical testing equipment is reportedly helping a specialist manufacturer of electrical wiring harnesses and control panels for diesel engine applications demonstrate compliance with rigorous industry standards.

Laser process gas analysers

QUANTITECH reports it has launched a range of process gas analysers based on tuneable diode laser absorption spectroscopy (TDLAS). “Over 8,000 instruments have been installed around the world, but the manufacturer Focused Photonics Inc (FPi) is new to the UK,” says Quantitech MD Keith Golding.

Rolled bearings range

BOWMAN INTERNATIONAL reports it has launched the new BowMet range of rolled bearings, billed as the biggest advance in plain sliding bearings in more than 70 years.

Quantum Controls wins prestigious 2015 ‘ABB Drives & Motors Supplier of the Year’ Award

A poll of over 350,000 people from UK Industry have voted QUANTUM CONTROLS the ‘ABB Motor and Drives Supplier of the Year 2015’. UK Corporate Excellence presented Kevin Brown, MD with the award in November 2015.

Keeping vibrations at bay

At a port operator in the UK, an extremely durable chocking system was required to ensure a new boiler would remain secure and protected, even when subjected to aggressive vibration activity.

Machining day proves a success

Designed to share the latest information and expert knowledge on the best and most economical methods of machining duplex and super-duplex material, SANDVIK says its recent machining day attracted more than 60 customers.

High impact strength

OVAKO says as companies push the limits of performance in cold climates and harsh environments, demand for strong, safe and well-proven materials is on the rise. Components like pipeline bolts, hydraulic parts and offshore lifting devices must offer greater reliability at sub-zero temperatures.

New treatment process tested

SILTBUSTER PROCESS SOLUTIONS (SPS) reports it has designed, built and commissioned a full scale pilot plant for treating the main effluent flow at Tata Steel Colors, production site at Shotton. The aim of the pilot plant was to test a new treatment process for the site – one which would reduce treatment costs and meet the site’s longer term needs.

Seal-less diaphragm pump

WANNER has launched the Hydra-Cell T8030, a Triplex diaphragm pump that it claims eliminates leaks, hazards and the expense associated with replacing seals and packing.

Manual control dosing pumps

WANNER INTERNATIONAL reports it has introduced a range of Hydra-Cell, ATEX approved Dosing Performance Pumps with precise mechanical variator control, all mounted on a substantial stainless steel base plate.

Exclusive distributorship

Uxbridge based INDUSTRIA BEARINGS & TRANSMISSIONS has confirmed it has been appointed as exclusive distributors of GMN high precision products for the UK.